美孚合成齿轮油批发商,美孚抗磨液压油,壳牌齿轮油,道达尔润滑油,克鲁勃润滑脂
手机: 13410254270
传真:0755-61962315
电话:0755-61133039
热搜:美孚力图H46抗磨液压油 美孚SHC XMP320合成齿轮油 美孚SHC 007高温润滑脂 壳牌可耐压HD320合成齿轮油 壳牌确能立S68空气压缩机油
Shell Madrela GP220

Shell Madrela GP220

Shell Madrela GP220
产品名称:Shell Madrela GP220
产品编号:
详细说明:
Madrela GP220
 
  详细内容
Technical Data Sheet

Shell Madrela Oils GP 
Synthetic lubricant for gas compressors

Shell Madrela Oils GP have been specially developed for cylinder lubrication of 
reciprocating compressors handling natural gas at high pressure.                              They are based on 
polyglycol base fluids and offer significant benefits over mineral oil-based products, 
especially in gas re-injection compressor applications.

Applications 
*  Gas re-injection compressors                                    *  Lubricant film retention 
    Recommended for cylinder lubrication of                           The reduced viscosity loss also results in 
    reciprocating compressors used for oilfield gas re-               retention of a stronger lubricant film on the 
    injection at pressures of up to 400 bar (5,800 psi).              cylinder wall, piston rings and packing 
                                                                      components.  Corrosion protection is 
*  LPG and LNG Vehicle fueling                                        increased and wear rates further reduced. 
    Suitable for use in compressors handling natural 
    and petroleum gas for vehicle fueling applications.            *  No effect on well formation 
                                                                      In gas re-injection applications, Madrela GP
*  Reciprocating gas compressors handling                             that is present as carryover in the re-inject is 
    hydrocarbon and other gases                                       compatible with well bore treatment chemicals 
    Madrela GP may also be used for compression of                    and resists deposit formation and well 
    hydrocarbon process gases, carbon dioxide,                        impairment caused by plugging of the well 
    hydrogen, helium and nitrogen.                                    strata. 
Special changeover procedures are required when 
moving from mineral oil-based products to Madrela                  Seal compatibility 
GP and vice versa. 
                                                                   Madrela GP may be used with most common seal 
Advice on applications not covered in this leaflet may             and packing materials.  However, leather seals 
be obtained from your Shell representative.                        are not reco

mmended for use with polyglycol- 
                                                                   based lubricants, as the natural fats tend to be 
Performance Features and Advantages                                removed causing seal shrinkage and hardening.

 

*  Reduced hydrocarbon gas solubility 
    Developed specifically to provide reduced gas                  Health and Safety 
    solubility.  This results in reduced viscosity loss in         Guidance on Health and Safety are available on 
    comparison with mineral oil-based products,                    the appropriate Material Safety Data Sheet, which 
    improving piston ring and packing lubrication.                 can be obtained from your Shell representative. 
    Service intervals can be extended, reducing                    Protect the environment 
    maintenance and downtime costs.                                Take used oil to an authorized collection point. 
                                                                   Do not discharge into drains, soil or water. 
*  Reduced feed rate 
    The improved lubrication allows a reduction in 
    cylinder feed rates, reducing lubricant 
    consumption and costs.

 Typical Physical Characteristics

 

  Madrela GP                                                                        100                220

  Kinematic Viscosity

      at 40°C                                             cSt      ISO 3104          85                 198

      at 100°C                                            cSt      ISO 3104         16.4               34.8

  Viscosity Index                                                  ISO 2909          208                223 
  Flash Point COC                                          °C      ISO 2592          288                295 
  Pour Point                                               °C      ISO 3016          -51                -39

  Density at 15°C                                       lb/gal    ISO 12185         8.7                 8.9

These characteristics are typical of current production. While future production will conform 
to Shell's specification, variations in these characteristics may occur.

 

相关产品:
壳牌莫雷拉 GP100

壳牌莫雷拉 GP100
Shell Madrela E Oil

Shell Madrela E Oil
Shell Madrela E

Shell Madrela E
友情链接: 美孚合成齿轮油批发商 网站建设 SG560 美润华 美孚抗磨液压油  
产品汇总 | 美孚抗磨液压油 | 美孚合成齿轮油 | 新闻动态 | 美孚技术支持 | 联系美润华 | 美润华资质证书 | 网站地图
版权所有 © 2015 美孚合成齿轮油批发商,美孚抗磨液压油,壳牌齿轮油,道达尔润滑油,克鲁勃润滑脂
技术支持:网站建设