美孚合成齿轮油批发商,美孚抗磨液压油,壳牌齿轮油,道达尔润滑油,克鲁勃润滑脂
手机: 13410254270
传真:0755-61962315
电话:0755-61133039
热搜:美孚力图H46抗磨液压油 美孚SHC XMP320合成齿轮油 美孚SHC 007高温润滑脂 壳牌可耐压HD320合成齿轮油 壳牌确能立S68空气压缩机油
RENOLIN CKC 100

RENOLIN CKC 100

RENOLIN CKC 100
产品名称:RENOLIN CKC 100
产品编号:
详细说明:

RENOLIN CKC

High Performance CKC Gear Oils

High Performance CKC Gear Oils

Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

The special characteristics of RENOLIN CKC series lubricants are:

  • High pressure absorption and excellent wear protection
     
  • Good viscosity-temperature behaviour and excellent low-temperature characteristics
     
  • Good corrosion protection for steel and nonferrous metals
     
  • Good resistance to ageing
     
  • Good compatibility with sealing materials
     
  • Low foaming
     
  • Avoidance of frictional vibration by the use of surface-active additives
     
  • Good demulsification characteristics
     
  • Multipurpose applications

Application:

RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.

RENOLIN CKC   100 150 220 320 460 680  
Lubricating oil type                
acc. to ISO 6743-6   CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680  
acc. to DIN 51 502   CLP 100 CLP 150 CLP 220 CLP 320 CLP 460 CLP 680  
Characteristics Unit             Test method
Colour   2 3 4 4.5 5 5 ASTM D 1500
Kinematic viscosity                
at 40 °C mm²/s 94.4 145.6 214 331 468 690 ASTM D 445
at 100 °C mm²/s 11.1 14.5 18.5 24.6 30.8 36.8 ASTM D 445
Viscosity index   102 98 96 96 95 87 ASTM D 2270
Density at 15 °C kg/l 0.884 0.89 0.895 0.9 0.903 0.922 ASTM D 1298
Flash point, Cleveland open cup °C 220 225 230 230 240 245 ASTM D 92
Pour point °C – 27 - 24 - 21 - 15 – 12 – 12 ASTM D 97
Neutralization number mg KOH/g 0.33 0.33 0.33 0.33 0.33 0.33 ASTM D 974
Saponification number mg KOH/g 1.3 0.84 0.84 0.84 0.84 0.84 ASTM D 94
Sulphate ash % mass 0.1 0.1 0.1 0.1 0.1 0.1 ASTM D 874
Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
Demulsification min < 20 < 20 < 20 < 20 < 20 < 20 DIN 51 599
Foaming,                
seq. I ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. II ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. III ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention   pass B pass B pass B pass B pass B pass B ASTM D 665
Ageing behavior,                
viscosity increase % 1 1 1 1 1 1 ASTM D 2893
precipitation number increase ml < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,                
relative volume change % 7 7 7 7 7 7 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore - 3 - 3 - 3 - 3 - 3 - 3 DIN 53 521 together with DIN 53 505
 

相关产品:
RENOLIN CLP 100

RENOLIN CLP 100
RENOLIN CLP 220

RENOLIN CLP 220
RENOLIN CLP 460

RENOLIN CLP 460
RENOLIN CLP 320 PLUS

RENOLIN CLP 320 PLUS
RENOLIN CLP 150 PLUS

RENOLIN CLP 150 PLUS
RENOLIN CKC 150

RENOLIN CKC 150
RENOLIN CKC 320

RENOLIN CKC 320
RENOLIN CKC 680

RENOLIN CKC 680
友情链接: 美孚合成齿轮油批发商 网站建设 美润华 美孚抗磨液压油  
产品汇总 | 美孚抗磨液压油 | 美孚合成齿轮油 | 新闻动态 | 美孚技术支持 | 联系美润华 | 美润华资质证书 | 网站地图
版权所有 © 2015 美孚合成齿轮油批发商,美孚抗磨液压油,壳牌齿轮油,道达尔润滑油,克鲁勃润滑脂
技术支持:网站建设